Reverse Engineering Team Board

Reverse Engineering Team Board (http://www.reteam.org/board/index.php)
-   Reverse Code Engineering (http://www.reteam.org/board/forumdisplay.php?f=23)
-   -   Hardlock Emulation - Need Help (http://www.reteam.org/board/showthread.php?t=565)

Terminator3 11-23-2007 05:36 AM

Hardlock Emulation - Need Help
 
Could experienced user please post COMPLETE instructions for how to Emulate a Hardlock dongle?
I've looked through every threat and not found a solid way to emulate a hardlock dongle with the new 5.2 hardlock driver.
Safekey.. I'm assuming it is the Softkey emulator.. the solver supposedly does not work for hardlock dongles?
FST Files? How do you emulate these? I have heard some users say they can be emulated with the Safekey Emulator since it only loads .dng files.. unless there is another emulator out there besides the Softkey one??
If so, could anybody post a link to the "Safekey Hardlock Emulator"? Haven't found much on google..

Thank you
Tim

Terminator3 11-24-2007 03:27 AM

Could somebody hook me up with the following files:
hl_emul.rar
Safekey hardlock.sys(or whatever else is included in Safekeys emulator)

I think I'll be able to figure out how the rest once I have those files.
Thanks

cEnginEEr 11-24-2007 07:47 AM

you have mixed up softwarekey with safekey, better check your first post again; here is my recommendation for you about hardlock emulation and plz do NOT pm me about sending emuls etc, I never do your homework for you....

There are 3 emulators you can use with hardlock:

1- HaspHL2007/8 from softwarekey with EDGE tool
Hooks hardlock driver and dos hasp/hardlock emulation; since it dos not replaces the driver therefor it can work with the new harlock drivers; this emulator dos not support Flora asic and RUS functions.

2- Hardlock.sys from safekey with Sataron's convertor
Replaces hardlock driver so sometimes protected proggies detect it;

3- VBus based Hardlock emulator with ...... tool
The best emul I have ever seen;

ps: most of those stuff can be found around the web, just search for it...

Regards

ripper_bg 11-24-2007 08:55 AM

The work is hard with Hardlock.
It is necessary alone to do emul.
You need these tools for you have success in this undertaking.
1.USB HASP key emulator, based on USB bus driver Chingachguk, Denger2k, tch2000
2.TORO Hardlock monitor v1.6

HASPHL 2007/2008 don't work correct with Hardlock.
Tests is with three а different Hardlocks

regards

cEnginEEr 11-24-2007 10:27 AM

hmmm...lets see

Quote:

Originally Posted by ripper_bg (Post 4565)
..The work is hard with Hardlock..

well, I don't think so ;)
Quote:

Originally Posted by ripper_bg (Post 4565)
..It is necessary alone to do emul..

????? have no idea what you're talking about :confused:
Quote:

Originally Posted by ripper_bg (Post 4565)
..1.USB HASP key emulator, based on USB bus driver Chingachguk, Denger2k, tch2000

This one only supports hasp keys unless you add hardlock emulation routines to it...
Quote:

Originally Posted by ripper_bg (Post 4565)
..2.TORO Hardlock monitor v1.6..

hmm...good, but does not support enveloped SW and FLORA asic;
Quote:

Originally Posted by ripper_bg (Post 4565)
..HASPHL 2007/2008 don't work correct with Hardlock..

wrong :D :D
it can emul LUNA asic if you feed in a right DNG file;

Terminator3 11-24-2007 01:53 PM

Quote:

Originally Posted by cEnginEEr (Post 4563)
you have mixed up softwarekey with safekey, better check your first post again; here is my recommendation for you about hardlock emulation and plz do NOT pm me about sending emuls etc, I never do your homework for you....

There are 3 emulators you can use with hardlock:

1- HaspHL2007/8 from softwarekey with EDGE tool
Hooks hardlock driver and dos hasp/hardlock emulation; since it dos not replaces the driver therefor it can work with the new harlock drivers; this emulator dos not support Flora asic and RUS functions.

2- Hardlock.sys from safekey with Sataron's convertor
Replaces hardlock driver so sometimes protected proggies detect it;

3- VBus based Hardlock emulator with ...... tool
The best emul I have ever seen;

ps: most of those stuff can be found around the web, just search for it...

Regards


1) What do you mean by feeding HASPHL 2007 with the right dng files? Can't I just dump the dongle using HASPHL 2007, run it through the Edge Solver tool, and load it with HASPHL2007?

2) I've only been able to download a Hardlock.sys from Safekey that was created in 2003. Problem is, I can't register for the Exetools forum. Would anybody be so kind to upload a newer Safekey emulator to Rapidshare or email it to me?

3) Confused. You contradicted yourself. If there is an existing VBus.sys emulator and tools for it can someone hook me up with these?

"Quote:
Originally Posted by ngoksun View Post
Vbus.sys was just for HASP dongle emulator. For hardlock, you can use safekey emulator.

There two version of vbus emulator; hasp & sentinel spro. IT IS NOT FOR HARDLOCK."

So does it work for Hardlock or not??

Thanks, I appreciate your help!

Git 11-24-2007 02:01 PM

It is clear and unambiguous. Read it again.

Git

Terminator3 11-24-2007 02:17 PM

Quote:

Originally Posted by Git (Post 4572)
It is clear and unambiguous. Read it again.

Git

That it might be, but elaborated and specific it is not. What tool do you need for the VBus emulator?

The problem which other and myself are facing is that the Exetools forum is locked up.
I need the following files:
Hardlock Monitor and Emulator 1.6.rar
or hl_emul.rar

If anyone can send them to me or post them on rapidshare, I'd really be thankful
Tim

kylegeek 11-24-2007 09:30 PM

Hi guys,

I am also having a problem with HASPHL2007.exe by EDGE.
As instructed, I downloaded the latest HASP HL driver (ver5.22) from Aladdin website and installed in on my PC. Then, started HASPHL.exe and started the protected software.
When, click on DUMP button, my PC went blue, and the PC restarted. So I didn't manage to get any dump from the USB dongle.
Any comments/suggestion gurus?

p/s: The protected software uses Aladdin's USB HASP HL key (ver2.16, red). Another thing, will the dump process render any bad effect (such as destroy the information within the dongle key, then make it useless?)

a newbie
-kyle-

Terminator3 11-24-2007 11:25 PM

The dump will not alter nor damage the dongle in any way.
The blue screen.. try the HASPHL2008.exe created on October 3, 2007..
If that doesn't work, well, there are other HASP HL emulators easily available..


Will some experienced guys post links to the hl_emul.rar or the Hardlock Monitor and Emulator 1.6.rar?
Thanks

Terminator3 11-25-2007 12:06 AM

I've been looking through old Forums using Google cache and found the following instructions including all files needed to emulate Hardlock dongles using the Safekey emulator:
http://translate.google.com/translat...hl=en&ie=UTF-8
Please note, you can NOT get hl_emul.rar anywhere other than on the link in the instructions, due to it having been deleted from rapidshare and the exetools forum being locked up.
I'll be working on emulating my dongle, once I get it, and if I get stuck I'll be sure to ask for help from experts here again.

hl_emul.rar can be downloaded here: http://slil.ru/24237472
the 2008 version of HASPHL from October 3, 2008 can be downloaded here: http://rapidshare.com/files/69113915...L2008.rar.html
the 2007 version of HASPHL including the NEEDED Edge solver tool: http://depositfiles.com/en/files/2054991

If anybody else has any other links to working Hardlock emulators, please don't mind to post them.
Thanks!

BfoX 11-25-2007 02:58 AM

This hl_emul.rar is Hardlock SafeKeys' 25k

Terminator3 11-25-2007 03:07 AM

Quote:

Originally Posted by BfoX (Post 4582)
This hl_emul.rar is Hardlock SafeKeys' 25k

Yes it is, like somebody else posted, the 32k and 36k versions are near impossible to get.
If anybody has the link to the newer HL Safekey Hardlock Emulators please dont mind to post a link!! Thanks

Here is the link to the 18k and 10k versions:
http://bbs1.pediy.com/showthread.php?p=279973
You'll have to register for the forum in order to download the attachment

bern 11-25-2007 04:00 AM

Password for hl_emul.rar
 
Quote:

Originally Posted by Terminator3 (Post 4578)
I've been looking through old Forums using Google cache and found the following instructions including all files needed to emulate Hardlock dongles using the Safekey emulator:
http://translate.google.com/translat...hl=en&ie=UTF-8
Please note, you can NOT get hl_emul.rar anywhere other than on the link in the instructions, due to it having been deleted from rapidshare and the exetools forum being locked up.
I'll be working on emulating my dongle, once I get it, and if I get stuck I'll be sure to ask for help from experts here again.

hl_emul.rar can be downloaded here: http://slil.ru/24237472
the 2008 version of HASPHL from October 3, 2008 can be downloaded here: http://rapidshare.com/files/69113915...L2008.rar.html
the 2007 version of HASPHL including the NEEDED Edge solver tool: http://depositfiles.com/en/files/2054991

If anybody else has any other links to working Hardlock emulators, please don't mind to post them.
Thanks!

Hi Terminator3,
do u know the password for hl_emul.rar? Thank.

Terminator3 11-25-2007 04:12 AM

Quote:

Originally Posted by bern (Post 4584)
Hi Terminator3,
do u know the password for hl_emul.rar? Thank.

the password is found on the russian instructions thread that i have posted the link of
it is: www.dongla.net

Why is everybody wanting the Safekey emulator?
From my understanding it only emulates the old HL driver.
Is the HASPHL Emulator not a lot easier and better? Considering it emulates the new driver..

chandrasekar 11-25-2007 05:15 AM

blue screen and restart
 
i did everything as explained. got seed, fst etc. ran the install.bat.

But when in run the protected program the system shows a blue screen and restarts. Can any one help me out

thanks

ripper_bg 11-25-2007 07:24 AM

@cEnginEEr
ok
these my test
1st.
type HASP4 M1
reed dumps. work fine.:)

2st
soft Bocad3D
type Hardlock
stap dump => show error 19:eek:

3st
soft SchueCal+
type HaspHL Luna New
stap dump
after start dumping HASP2007/8 freezes:eek:

4st
soft OptyWin
type HaspHL Luna New
stap dump
after start dumping HASP2007/8 freezes:eek:

tell me where I wrong

cEnginEEr 11-25-2007 07:32 AM

Well, seems like you have problem with dumping hardlock not emulating; no problem..dump them with sporaw or safekey's dumper and send me; I'll make dng file so you can test;

P.S: needless to say that for dumping hardlock you may need to wait for 15 min;

Regards

chandrasekar 11-25-2007 10:23 AM

my hl-dump
 
dear @cEnginEEr

this is my link to hl-dump. i used this to make seeds. I got seed 3and seed 1 and 2 were zeros. I made fst and install.bat
once i use it the system halts and restarts.

If tried using hasphl 2008 shows error 19

if i use hasp 2007 and edge tool , when i use the protected sofware i get the mesaage " system date mismatc or y2k problem or cmos battery weak"

I use amd 64 bit laptop with avg antivirus

Can u help me out to overcome this


Thaks a lot

My dup link http://rapidshare.com/files/72174763/hl-dump.zip.html

chandrasekar 11-25-2007 10:30 AM

hl-dump blue screen and restaring problem
 
@cEnginEEr

I have used hasphl 2008 and got error 19

I used hasp2007 with edge tool and got dump and dng. But when i use the protected software i get the error "system date appears to be not ok amay be y2k problem or cmos abttery weak"

I used hl-dump and got dat files and reg and got seeds. I made a fst file and install.bat file. when i run the protected software i get blue screen and the software restars. i am attaching the hl_dump files for your review. can u help me out

Thanks

http://rapidshare.com/files/72174763/hl-dump.zip.html

Chandrasekar

kylegeek 11-25-2007 12:00 PM

Hi sifus & gurus (esp. @cEnginEEr):

I managed to get a dump (.dmp) from HASP HL USB key successfully. I figured there must have been memory problems with my PC, so I disabled/killed almost all applications, which were run during start-up and left it with basic start-up services. :)

So I tried to solve the .dmp file to .dng file using EDGEHASP.exe by using the HASP HL tab. When I clicked on Browse button, it could not detect any .dmp file although I keep it in the same folder as EDGEHASP.exe. Somehow EDGEHASP.exe could not detect the .dmp file. The only way I forced EDGEHASP.exe to pick the file was by typing *.* so that the .dmp file got recognized. Then, specified the output file i.e. .dng file.

Tried to solve it, but EDGEHASP.exe returned error as:
"Wrong filesize for a dump."
Why is that? Please anyone help me. :confused:

I attach a link to download my .dmp file for your review:
http://rapidshare.com/files/72190927/51E548D4.rar
Thank you guys.

-kyle-

Terminator3 11-25-2007 01:05 PM

@Kyle
It seems that your dongle is actually not a HASP-HL dongle, rather a HASP dongle.
I tried solving your file under the HASP tab and it worked fine.
I don't think I need to attach the dng file, please try it yourself and let us know if you get it working.
If it is a HASP-HL dongle, the edge solver tool can not solve your dump.. you'll have to see if anybody can solve your dump manually or look for another HASP-HL emulator.

@Chandrasekar
Try the 2008 HASPHL. What version of the Safekey emulator are you using? Check the file size of the hardlock.sys in the directory where the Install.bat is located.

kylegeek 11-25-2007 01:26 PM

Quote:

Originally Posted by Terminator3 (Post 4595)
@Kyle
It seems that your dongle is actually not a HASP-HL dongle, rather a HASP dongle.
I tried solving your file under the HASP tab and it worked fine.
I don't think I need to attach the dng file, please try it yourself and let us know if you get it working.
If it is a HASP-HL dongle, the edge solver tool can not solve your dump.. you'll have to see if anybody can solve your dump manually or look for another HASP-HL emulator.

@Terminator3,
thanks for taking a look at my problem. But the physical USB key itself has "HASP (HL)" characters stamped on it. The HL is enveloped by a circle. It's red in color. So I believe it is an HASP-HL USB key. Something like this:
http://www.aladdin.com/hasp/solution...-security.aspx

chandrasekar 11-25-2007 01:36 PM

hordlock,sys size
 
@Terminator3

Thanks for the reply. When i use hasphl2008 it show detects the dongle as 5b6f:5111. but when i try to dump it i get the error 19 and it stops. so not able to use it.

the size of hardlock.sys is 24KB (24576) size on disk

any more info required
thanks
chandrasekar

softkey emulator version 2007

Terminator3 11-25-2007 01:50 PM

Well I'll leave the technical problems to the experienced Engineers here..
But does the software even start with the original dongle?
I'd run a VM(Microsoft Virtual Machine), install another OS, install the software, dump and emulate the dongle, and see if that works?
If it doesn't, well, hopefully some experienced guys here will help you fix it.

chandrasekar 11-25-2007 02:05 PM

@Terminator3

Yes it works with the original dongle. I use winxp sp2 on a AMD turion.

During web search i got a idea that windows DEP is causing the problem i diabled it still i get the same proble

I will try this out on a diffrent os with intel processor and will let u know

i hope some Great brains in this fouram will help me out

Thanks for the help

chandrasekar

kylegeek 11-25-2007 05:06 PM

@Terminator3

thanks for looking at my problem. Well I was wondering my reply hasn't appeared yet to respond to yours. Guessed it needs to pass through a moderator first.

Anyway, I was kinda skeptical when you said the Aladdin USB key dump was actually an HASP instead of HASP-HL. Then, I did some checking on the software installation help file. It is confirmed that the protected software used HASP (although the USB key has word "HASP (HL)" stamped on it, and it is red in color). So I had to redo all the works i.e. uninstalled the HASP-HL drivers and installed the latest HASP driver ver. 5.22. Thanks for pointing it out. :)

I managed to get the .dmp file based on the latest HASP driver. Followed the instructions, and managed to solve the .dmp to .dng file. However, I did not quite sure on EDGEHASP.exe's Keygen tab work.
1. Do we require to run the Keygen to fully activate HASPHL2007.exe license?
2. If so, what are the IDs of HaspID that we are required to enter?

I have tried so many configuration such as copying the generated license from EDGEHASP.exe and copied it to HASPHL2007.exe's Emulator tab to activate the license. Of course, it successfully activate the full license of HASPHL2007, yet when I tried to run the protected software (i.e. after load up the .dng file using Dongles tab), it gave error said the following:

QUOTE
ERROR. Unable to obtain a license:

Dongle N1021 is connected to this machine.
No dongle could be found over the network.

There are no license for modules [ProtectedSoftware] and [ProtectedSoftware] on dongle N1021.

The following license files are valid, but the corresponding dongle could not be found or has no free licenses: N1021.lic, N1022.lic
The license file directory was: C:\Program Files\[ProtectedSofware]\[ProtectedSofware]
UNQUOTE


Does anyone have a proper guideline on how to operate EDGEHASP.exe and HASPHL2007.exe?
Any sifus & gurus here, please help me. Thank you.

-kyle-

papi 11-25-2007 05:39 PM

contact with me cod-x@live.com by msn ;)

Terminator3 11-26-2007 12:48 AM

Whenever you get your blue screen problem fixed, please post the solution so we can all benefit from it, thanks!!

ripper_bg 11-26-2007 06:15 AM

Quote:

Originally Posted by kylegeek (Post 4593)
Hi sifus & gurus (esp. @cEnginEEr):

I managed to get a dump (.dmp) from HASP HL USB key successfully. I figured there must have been memory problems with my PC, so I disabled/killed almost all applications, which were run during start-up and left it with basic start-up services. :)

So I tried to solve the .dmp file to .dng file using EDGEHASP.exe by using the HASP HL tab. When I clicked on Browse button, it could not detect any .dmp file although I keep it in the same folder as EDGEHASP.exe. Somehow EDGEHASP.exe could not detect the .dmp file. The only way I forced EDGEHASP.exe to pick the file was by typing *.* so that the .dmp file got recognized. Then, specified the output file i.e. .dng file.

Tried to solve it, but EDGEHASP.exe returned error as:
"Wrong filesize for a dump."
Why is that? Please anyone help me. :confused:

I attach a link to download my .dmp file for your review:
http://rapidshare.com/files/72190927/51E548D4.rar
Thank you guys.

-kyle-

you dongle is HASP

take this file http://rapidshare.com/files/72360331/51E548D4.dng.dng
need have full license to work you soft

regards

PS sorry my mistake. this is NetHasp

kylegeek 11-26-2007 12:07 PM

@Terminator3:
before I posted the long message, I did write something to explain what I did that I managed to dump the dongle. I guess the message still not approved yet by Administrator to be posted. Don't know why.
Anyway, what I did was really simple. I figured my machine must have been bloated with a lot of programs running background. Although I have 2GB RAM for WinXP SP2, but my guts feeling telling me that HASPHL2007.exe must have conflicted with one of those programs. So I restarted the PC and killed all unnecessary processes and programs so that the machine became 'light'. Then, I just followed the instruction, and off it went...I got the dump.

@ripper_bg
thanks for solving my dmp file to dng file. Before you posted your dng file, I also managed to get the dmp solved to dng by myself using EDGEHASP.exe tool. Yet, another problem persisted.
When I cleared the storage (as I load dump previous, because I have loaded with previous dng file, and I wanted to have a new one to be loaded) and re-loaded with the new .dng (be it the one I produced myself or the one came from you), my PC went blue screen. The problem now is persisting. Repeat the processes several times, the PC always went blue screen.
By the way, what do you mean by full license of my software? Are you talking about HASPHL2007.exe? I thought I should use EDGEHASP.exe Keygen tab to generate a full license for HASPHL2007.exe. Yet, the screen is quite confusing. Where can I get info to feed into 'Licensed dongles - ID is HaspID'?

Any ideas gurus?

-kyle-
can't give up this time...almost there....

ripper_bg 11-26-2007 01:11 PM

@kylegeek
you have NetHasp
make dump and log file with haSploGer 1.71 Xyrurg & sataron
and send me

regards

Terminator3 11-26-2007 07:22 PM

Can anybody explain to us all how the licensing of HASPHL2007 works? How do you use the Keygen from Edge?
Thanks

ripper_bg 11-29-2007 09:15 AM

hi cEnginEEr
I tested your *dng file
HASPHL2007 succeed and perfect emul soft with old hardlock
good job

regards
ripper_bg

kylegeek 11-29-2007 11:41 AM

NetHASP dump by HLmon
 
@ripper_bg
It took me some times to do a bit of research on dumping NetHASP dongle. I tried your suggestion i.e. using haSploGer 1.71 Xyrurg & sataron, but unfortunately, it gave errors while dumping.
So I turned to HLmon.exe to dump the dongle.
Could you please look at these dump files. The file can be downloaded here:
http://rapidshare.com/files/73114454/LOGS.rar.html

Is it possible to emulate NetHASP using HASPHL2007.exe? If not, any other suggestions would be much appreciated.

-kyle-

kooolguy 12-06-2007 06:19 AM

HL
 
Hi cEnginEEr,

I have tested the SENTEMUL2007.exe with the edge convertor it work like magic. Thanks.

I am having problems with hardlock emulation. I got the dmp through HASPHL2007.exe. Then using the Edge tool I converted it to dng file. But it is not working. Can u please help? Also, how can I use VUSB.sys to emulate the HL dongle.
Thanks.

Terminator3 12-07-2007 04:16 PM

I've finally received my software and dongle.
I successfully dumped the dongle via HASPHL2008(the 10/3/07 version) and solved it with the edge tool. Then I loaded it in HASPHL2008 and no problems.
However, when I start the software, the following error message comes up: "Invalid License Information".
Note: It is a Hardlock dongle and I am using the newest Hardlock drivers.

Can anybody help me?
I'd really appreciate it.
Thanks!

bern 12-08-2007 10:55 AM

Terminator3,

Maybe u can try to load the dng by HaspHL2007.

kooolguy 12-09-2007 12:27 PM

DMP to DNG for HaspHl2008
 
CaDoe anyone have edge too for converting DMP to DNG for HaspHl2008 ? Aslo, does it work well with Hardlock?

fastlane 12-19-2007 06:05 PM

Quote:

Originally Posted by cEnginEEr (Post 4588)
Well, seems like you have problem with dumping hardlock not emulating; no problem..dump them with sporaw or safekey's dumper and send me; I'll make dng file so you can test;

P.S: needless to say that for dumping hardlock you may need to wait for 15 min;

Regards

Hi I also made a dump with sporaw's HLdump and got a dat and a reg file how do I get an emulator aout of these two files. Hope you can help me. Since I am a new member, let me know how I can get these two files to you?
Thank you


All times are GMT -4. The time now is 09:58 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.