Reverse Engineering Team Board

Reverse Engineering Team Board (http://www.reteam.org/board/index.php)
-   Reverse/Social Engineering (http://www.reteam.org/board/forumdisplay.php?f=22)
-   -   Sentinel Emulator 2010 X 64 (http://www.reteam.org/board/showthread.php?t=2750)

dancecorp 07-13-2010 07:58 PM

Sentinel Emulator 2010 X 64
 
I recently got a new pc, I was running windows 7 32bit on my old system. I had a safenet sentinel dongle for the program AcornPipe, that I made a emulation of and was using sentinel emulator 2007, it worked fine with windows 7. my new system is 64 bit tho, and it will not work. I can install the sentinel emulator driver, but the dump load area is not usable. it also tells me my service is stopped and I need a update code, please help

Paldr001au 07-20-2010 01:47 AM

It won't work. I've tried for ages with no success. There are 2 approaches that you can find more info on search feature of forums.... I'll give links for them though to get you started. I'm in the same boat so if you have any luck let me know please and we'll help each other through it.
Below is link for method I haven't tried yet (my computer just got sent off for repairs with bad video crd) so got no 64bit o/s to trial with at the moment.

http://www.reteam.org/board/showthread.php?t=662

or you need to use a program called PVA 3.3 (has exe file sprodump) to dump dongle and create a dongle "image". Then you need to use program called dmp2mkey through command prompt. Copy your dump file and this program (dmp2mkey) to a folder preferably on your c drive in an easy folder name, lets say dump for example. Load command prompt from start, programs, accesseries and it'll give you a little black window for DOS. type cd.. followed by enter, and then same again. the command prompt should say C:\ and from here you then want to type cd dump which will move you into the dump folder. then type dmp2mkey (whatever the dump file is called) and it should then convert the dump file to a reg file.

Next step is to install multikey 18.0.3 to your computer. Windows 7 will crack a wobbly when you try and put it on as the drivers for the program are not signed/verified by windows. steps describing how to do this are below:
http://www.reteam.org/board/showthre...t=verification

let me know how you get on...... Ps you can find all these files on this site by searching forums or just search them on google and probably find them within rapidshare as that seems to be where the files are kept by the moderators and other helpful people on this site. Have a go and if you have any problems feel free to ask on this site, but if the questions show you've not invested any time to search for the solution they won't offer help as you'll be amazed at how many requests they get for cracks etc and it just wastes their time....

nrdgnr 07-21-2010 10:01 AM

Hi Paldr001au ;

i am using the program Wysiwyg R22 , i was using on my old computer X32 with SENTEMUL2007 and it was working normal but now i am using 64 bit win7 and i can't use SENTEMUL2007 anymore
so i search on the forum and i followed this steps ;
1.i ve disabled uac
2.downloaded driver sşgnature enforcement overrider and get test mode ,
3.i ve installed multikey 18.0.3
4.i ve installed 2 reg file which i have before

now i can see "virtual usb multikey" on device manager but i don't know what i have to after..
pls i need your help , thanks...

yogi_saw 07-21-2010 12:16 PM

U were supposed to merge reg and then install mk never mind run restart.Bat
ur system tray will popup new superpro device found
it means u have success...

nrdgnr 07-21-2010 12:47 PM

i am really amateur about this subject , thanks for the answer but could u open this subject little bit? for example what u mean about merge reg ?

really sorry..

can i use my old reg files or i have to make new reg files from dng files with dmp2mkey or smthng?


here is my old reg files

http://rapidshare.com/files/408263438/crack_wysiwyg.rar

thnx for helps..

Paldr001au 07-21-2010 04:50 PM

nrdgnr you will need to pretty much start from scratch from my understanding as senemul2007 was the only thing that really read those dng files..... You need to run PVA 3.3 on the dongle and that will create a whole different file type (*.dmp) not (*.dng).

Someone else on this site may know otherwise. I suppose the other escape for you to use the old software is to run a virtual computer in 32bit mode... But I have no idea about that and will probably involve joining another forum, laughs.....

nrdgnr 07-21-2010 09:31 PM

thanks for the answer...

raapi 09-14-2010 03:44 AM

In 32 bit Windows, use old .dng file with sentemul2007 emulating the dongle, then fire up PVA. 3.3 (sprodmp.exe) and dump the key, you'll get .dmp file, then use Git's Tool "dmp2mkey.exe" to make a *.reg file. After that move to your 64 bit Windows and follow the guide from pt.4 link

PS. dont forget to use the "Driver Signature Enforcement Overrider" tool to get past the driver signing problem.


All times are GMT -4. The time now is 09:49 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.