Dongle Aladdin/Sentinel, wer kann die Abfrage entfernen?

[Marmaras]

Have here an additional prog for AutoCAD 2002LT, possibly run with newer versions. Can probably install both on 7, the V + Z plugin requires a dongle, but always ask for the dongle, although this is in the LPT port!

At 7 in the 32-bit version, as well as the 64-well version installed, dongle via PCI card is not recognized. (Not even on a slightly older machine that still has an LPT port!)

(All were not so tragic if the company has not closed.

Bought it at a virtual (VMWare Workstation) on XP installed below 7. But the same: the dongle is not recognized!

Can someone help, because that is the prog use without dongle?

My hope, since many still use XP, and this prog is useful for other users. Would be glad if there is someone working on the necessary clue with. I also can decompile using prog, but in order to crack a dongle, or probably easier, remove the dongle query, but there is something more.



Download AutoCAD 2002 Lt - Activate keys see below.
Copy with Alcohol 120%. Mount it with alc or daemon's tool, then it works. With Virtual Clone Drive e.g. it dosn't run!

Serial: 700-51125710
CD-Key: G5NSYR
Autho Code: 97908257

http://www.4shared.com/file/v6B3cPCf/2002LT.html

A rar prog and older, but simple and good, special for architect's.

Postscript:

The dongle is for the following prog: 3D Studio Viz R3i from Autodesk.

I've found a 3dsviz.exe without dongle neccessary! But, there is a password neccessary!!!!

Is here anyone, who can crack the password???? [pup = rar]

Please, tell me.

[BfoX]

make the dongle dump with the PVA dumper

[Marmaras]

Originally Posted by BfoX

make the dongle dump with the PVA dumper

Hi Bfox, can you tell me, where I can download the prog PVA dumper? I must tell you, that I've done a dump with SuperPro.exe, the result dosn't work!

Here the result:
REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\28EF0000]
"Type"=dword:00000000
"DongleType"=dword:00000003
"Name"="V+Z Bau 2002"
"CellType"=hex:\

"sntMemory"=hex:\

I think, the problem is, that the dongle is not recognized. What can I do? Is there no chance, to kill the dongle-question in the prog?

Is there anyone able for it and can kindly help me?

[crab]

Stay relaxed
read the forum
use shearch Function
this kind of dongle is very easy to emulate

[kjms]

@Marmaras
save as reg, use multikey 18.0.3 and lower version.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\xxxx0000]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Tue Apr 05 23:38:54.283 2011"
"Name"="xxxx Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,03,03,03,\
03,03,03,03,00,00,00,00,\
01,01,01,01,02,02,02,02,\
03,03,03,03,03,03,03,03,\
01,00,02,02,03,03,03,03,\
02,02,02,02,03,03,03,03,\
03,03,03,03,01,01,01,01,\
00,00,00,02,03,03,03,03
"sntMemory"=hex:\
xx,xx,xx,xx,00,00,00,00,9A,97,01,00,F8,80,00,00,\
18,26,56,DA,00,00,00,00,00,00,FF,FF,99,99,66,66,\
29,B2,C5,3A,AD,AC,F1,8A,FF,FF,FF,FF,10,00,00,01,\
00,00,00,00,00,00,00,00,7E,77,C4,F7,2B,3A,3B,E0,\
13,00,14,00,FF,FF,01,00,00,00,00,00,07,92,E7,FA,\
FF,FF,FF,FF,00,10,FF,FF,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,74,1F,E5,6D,DC,73,67,03,\
FE,FF,FD,0F,FC,FF,00,01,00,00,00,00,55,3D,2F,FF

also change this MultiK ey=MultiKey

[Marmaras]

Hi, with the multikey it is really simple and good!

The prob was the softkey. If you don't start the softkey in special folder on the cd before the installation, the prog gives out a fake/lie, 5 times each start, that the hardlock is missing!!!! That's not the true!!!

You must start the softkey and enter a special hardwarebased code, then the softkey starts the installation! No other way possible!

I've never seen such a constellation until now. Normaly, start the installation by autostart or setup.exe, that's it. You do, the installation run, start after that ACAD and then show you: hardwarelock is missing 5 times every start! After one day, you've seen often, you believe it!

The multikey, my first meet from here in the forum, is a fine worker. Absolutely no prob's for using on my notebook without an lpt-port, without a real dongle. It does everything as it should. Thanks to all the members who helped me!

The dongle is for the following prog: 3D Studio Viz R3i from Autodesk.

I've found a 3dsviz.exe without dongle neccessary! But, there is a password neccessary!!!!

Is here anyone, who can crack the password???? [pup = rar]

I have done myself, 20-digits

Thank you anyway.