Reverse Engineering RET Homepage RET Members Reverse Engineering Projects Reverse Engineering Papers Reversing Challenges Reverser Tools RET Re-Search Engine Reverse Engineering Forum Reverse Engineering Links

Go Back   Reverse Engineering Team Board > Reverse Engineering Board > Reverse Code Engineering
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 01-11-2011, 04:22 AM
mits007 mits007 is offline
Member
 
Join Date: Jan 2011
Posts: 13
Default

@kjms
I already did that with no result.
There are 2 different serials.
The first one is on the dongle with 6 characters and the second is in the password file that comes with the software, which is 16 characters.
With toromonitor I can see that the software is verify the 16 digits password.
Now what am I going to do?
Reply With Quote
  #12  
Old 01-11-2011, 05:23 AM
Trit0n Trit0n is offline
Senior Member
 
Join Date: Feb 2008
Posts: 115
Default

The serial on the dongle you don't need!
(is only the serial number of dongle)
You only need the 2nd Serial (16 characters in the password file)
- Try out one after the other combinations of seed (in .Reg File of Multikey EMU)
- look every time with the ToroMonitor
- If VerKey = Serial then everything is ok.

Last edited by Trit0n : 01-11-2011 at 07:48 AM.
Reply With Quote
  #13  
Old 01-11-2011, 05:34 AM
mits007 mits007 is offline
Member
 
Join Date: Jan 2011
Posts: 13
Default

@Trit0n
Thank you very much, I will try it again.
I have to say that I tried that but with not all of the seeds.
If you see the post with the error messages it was send at 04:00 and I was very tired.
Thanks again, I 'll post the results.

edit: Can I put 16digits ID dword??????

Last edited by mits007 : 01-11-2011 at 05:38 AM.
Reply With Quote
  #14  
Old 01-11-2011, 10:59 AM
woxiwox woxiwox is offline
Senior Member
 
Join Date: Apr 2008
Posts: 137
Default

Quote:
Originally Posted by mits007 View Post
@Trit0n
Thank you very much, I will try it again.
I have to say that I tried that but with not all of the seeds.
If you see the post with the error messages it was send at 04:00 and I was very tired.
Thanks again, I 'll post the results.

edit: Can I put 16digits ID dword??????
you can ot put 16 digits ID dword your dongle is LPT not need Dword then what is your software serial no write here
Reply With Quote
  #15  
Old 01-11-2011, 11:38 AM
mits007 mits007 is offline
Member
 
Join Date: Jan 2011
Posts: 13
Default

@woxiwox
What do you mean?
LPT dongles don't require ID Dword in reg file?
Reply With Quote
  #16  
Old 01-11-2011, 05:26 PM
Trit0n Trit0n is offline
Senior Member
 
Join Date: Feb 2008
Posts: 115
Default

@ mits007
Believe me you really do not need ID Dword!
look at the example of BfoX (in the beginning of Tread)
"ID" = dword: 00000000 (the same goes for EMU Multikey)
all you need is:
- Multikey EMU Perhaps Gamebit0 release is easier, but only for X86
- Multikey EMU (from elite_r) has a bug in Support HL_CALC) (Sorry elite_r )
- The right seeds (especially Seed 3)
But you can try out everything very easy (ToroMonitor as I have told you)
Reply With Quote
  #17  
Old 01-11-2011, 06:33 PM
mits007 mits007 is offline
Member
 
Join Date: Jan 2011
Posts: 13
Default more confision

toro's log with multikey and 16 digit ID Dword or with ID 000000, is the same

Code:
Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=, 0000000000000000
VerKey=, 0000000000000000
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=STATUS_OK

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=f001

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=f001

Hardlock In:> HL_READBL: ModAd=20767 (0x511F)
Hardlock Out:> HL_READBL: ModAd=20767 (0x511F) -> Status=STATUS_OK
Memory:
ЎшЎштXс ,0000000000000000
Џ%OтXс ,0000000000000000
фRфRсXсX ,0000000000000000
шЎO%т/J ,0000000000000000
ЎшЎшXст ,0000000000000000
%OЏXст ,0000000000000000
фRфRсXсX ,0000000000000000  <-- this is not original
O%шЎ/Jт ,0000000000000000
XстЎшЎш ,0000000000000000
Xст%OЏ ,0000000000000000
сXсXфRфR ,0000000000000000
/JтO%шЎ ,0000000000000000
XстЎшЎш ,0000000000000000
Xст%OЏ ,0000000000000000
сXсXфRфR ,0000000000000000
/JтO%шЎ ,0000000000000000

Hardlock In:> HL_LOGOUT: ModAd=20767 (0x511F)
Hardlock Out:> HL_LOGOUT: ModAd=20767 (0x511F)

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxxx, XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=Cannot acquire port

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=Cannot acquire port

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available
In both cases I get this --> [IMG] Uploaded with ImageShack.us[/IMG]

__________________________________________________ __________________________
toro's log with dongle attached on PC

Code:
Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=, 0000000000000000
VerKey=, 0000000000000000
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=STATUS_OK

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=f001

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=f001

Hardlock In:> HL_READBL: ModAd=20767 (0x511F)
Hardlock Out:> HL_READBL: ModAd=20767 (0x511F) -> Status=STATUS_OK
Memory:
ЎшЎштXс ,0000000000000000
Џ%OтXс ,0000000000000000
фRфRсXсX ,0000000000000000
шЎO%т/J ,0000000000000000
ЎшЎшXст ,0000000000000000
%OЏXст ,0000000000000000
фRфRсXсX ,0000000000000000  <-- this is not original
O%шЎ/Jт ,0000000000000000
XстЎшЎш ,0000000000000000
Xст%OЏ ,0000000000000000
сXсXфRфR ,0000000000000000
/JтO%шЎ ,0000000000000000
XстЎшЎш ,0000000000000000
Xст%OЏ ,0000000000000000
сXсXфRфR ,0000000000000000
/JтO%шЎ ,0000000000000000

Hardlock In:> HL_LOGOUT: ModAd=20767 (0x511F)
Hardlock Out:> HL_LOGOUT: ModAd=20767 (0x511F)

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=STATUS_OK

Hardlock In:> HL_LOGOUT: ModAd=20767 (0x511F)
Hardlock Out:> HL_LOGOUT: ModAd=20767 (0x511F)

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=No device available

Hardlock In:> HLM_LOGIN: ModAd=20767 (0x511F),
RefKey=TRUMPFSW, YYYYYYYYYYYYYYYY
VerKey=xxxxxx', XXXXXXXXXXXXXXXX
Hardlock Out:> HLM_LOGIN: ModAd=20767 (0x511F) -> Status=STATUS_OK

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=378

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=378

Hardlock In:> HL_GETINF!!! ModAd=20767 (0x511F)
Hardlock Out:> HL_GETINF!!! ModAd=20767 (0X511F) -> Status=STATUS_OK
ApiVersion=3.88
Access=1
PortAddress=378

Hardlock In:> HL_LOGOUT: ModAd=20767 (0x511F)
Hardlock Out:> HL_LOGOUT: ModAd=20767 (0x511F)
xxxxxxxxxxxxxxx and YYYYYYYYYYYYYYYYYYY values are the same in both cases and YYYYYYYYYYYYY is the same with the password that came with the software.
I was able to notice that with multikey the software can't find the port, so it's not emulating????

I am using multikey 18.0.3, not the gamebit0 release which I can't find.


.....and I am still trying on x86 machine ......x64 is the goal.....

Last edited by mits007 : 01-12-2011 at 04:16 AM.
Reply With Quote
  #18  
Old 01-11-2011, 08:07 PM
bolota bolota is offline
Senior Member
 
Join Date: May 2008
Posts: 128
Default

2 mits007

I think the best way to emulate this dongle is use safekey hardlock emulator, search in this forum.
Multikey in this case is not the best, in my opinion.
Look it http://www.reteam.org/board/showthread.php?t=565

Last edited by bolota : 01-11-2011 at 08:12 PM.
Reply With Quote
  #19  
Old 01-12-2011, 02:49 AM
Trit0n Trit0n is offline
Senior Member
 
Join Date: Feb 2008
Posts: 115
Default

@ mits007
What you see as "XXXXXXXXXXXXXXX" is not the VerKey from dongle, it is the password from your LIC file.
So I guess the seed 3 is incorrect (or just Multikey HL_CALC Bug)
Make even a test with this tool: (Rename it to Get_key.exe)
Type from command prompt:
Get_key TRUMPFSW 20767
If RESULT = PASSWORD (or "XXXXXXXXXXXXXXX" from Toro Monitor))
everything is OK.
(The result MUST correspond to the PASSWORD)
Attached Files
File Type: zip get_key.exe.zip (57.9 KB, 126 views)
Reply With Quote
  #20  
Old 01-12-2011, 03:39 AM
mits007 mits007 is offline
Member
 
Join Date: Jan 2011
Posts: 13
Default

@Triton
The value XXXXXXXXXXXXX is not the same with the YYYYYYYYY.

XXXXXXXXXX = TRumpfsw number 16 characters
YYYYYYYYYY = My serial from password disk 16 characters

The strange think is that the YYYYYYYYY value is always the same regardless the ID Dword.

Last edited by mits007 : 01-12-2011 at 03:53 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump





Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.