dongle give me error

[kazablnka]

dongle c500 pic

can any one help me emulating my dongle??????????

That's what in did:

-installed the latest drivers 7.6.1
-installed the Program
-dumped the dongle with pva 3.3
-created the ssp with f1 ( While creation it with f1 it shows 0 algo) But creates .ssp file
-created the reg file with UniDumptoReg
-changed the reg like it was described in the How-to.
-installed the vusbus
-imported the reg.
-restart

But the Programm gives error.Unable to get a Valid USB dongle. Where's my mistake ?
Here is the reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ru-board\mulators\Dump\E1BF1211 ]
"DongleType"=dword:00000003
"Name"="Dump E1BF"
"Type"=dword:00000000
"CellType"=hex:18,EE,90,7C,70,09,91,7C,C0,E4,97,7C ,B5,21,80,7C,\

11,20,80,7C,98,E7,00,00,F8,FE,12,00,AB,10,81,7C,\

02,00,00,00,02,00,00,00,22,37,40,00,40,00,00,00,\

D4,FE,12,00,A4,21,87,00,08,FF,12,00,91,55,40,00

"sntMemory"=hex:0B.44,00.00,27.D0,00.0F,00.08,00.0 0,00.00,00.00,\
02,23,00,02,00,00,00,00,20,A0,00,87,00,01,00,00,\

00,02,00,32,00,0B,00,00,85,E4,00,00,00,08,00,00,\
20,C3,00,01,A8,71,00,00,58,65,00,02,BE,63,02,01,\

00,63,00,00,9A,D2,7C,80,FF,FF,FF,FF,FE,D8,00,12,\
09.45,7C.91,09.4E,7C.91,10.00,00.40,00.00,00.02,\

00.32,00.00,32.88,7C.91,00.24,00.00,F0.00,7F.FD,\
10,05,7C,90,FE,98,00,12,00,00,00,00,FE,F8,00,12
dng file
http://rapidshare.com/files/420958426/E1BF.rar

[BfoX]

simply - this is NOT SUPERPRO dongle.

[kazablnka]

[DO NOT QUOTE WHOLE MESSAGES. WHAT IS SO DIFFICULT ABOUT THIS?]

realy friend
i have it in bin file too may you help or what can i do?

[BfoX]

bin file? from the pva dumper?
imho, you need make log.

Make log with USBTrace . Simple manual:

1) Download USBTrace
2) Setup and register USBTrace
3) Run USBTrace
4) Press button with label "Capture hot plugged USB devices"
5) Press button with green arrow
6) Insert dongle to USB
7) Press button with red square
8) Save log to file
9) In top left corner (in USBTrace) select your
USB device and check it
10) Press button with green arrow
11) Run your program and work with her
12) Press button with red square
13) Save log to file

[kazablnka]

dongle is safenet sorry

[BfoX]

safenet proteq usb