Accessing other modules in dongle?

[N3kr0s]

Thank you for all your help on making a emulator. After many long nights I was successful.
Now the question I have is How do I unlock the other modules in the dongle?
This hasp hl has at least 14 other modules that I cant get to.
Does anybody have tips on how to go about this?

[fejkus]

Originally Posted by N3kr0s

Thank you for all your help on making a emulator. After many long nights I was successful.
Now the question I have is How do I unlock the other modules in the dongle?
This hasp hl has at least 14 other modules that I cant get to.
Does anybody have tips on how to go about this?

if your program uses dongle memory to unlock programs, you can unlock.

data section may look on third row originaly:
00, 00, 00, 00, 00, 00, 00, ...
and if you make some correction:
00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,\
it unlock programms no. 1 - 4 (four couple of bytes on program)

you must try, every programm uses key another way.

[N3kr0s]

Originally Posted by fejkus

if your program uses dongle memory to unlock programs, you can unlock.

data section may look on third row originaly:
00, 00, 00, 00, 00, 00, 00, ...
and if you make some correction:
00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,00,00,FF,FF,\
it unlock programms no. 1 - 4 (four couple of bytes on program)

you must try, every programm uses key another way.

Thanks for getting back to me, I did more investigating into the information you gave me, which leaves me a little puzzled
I have a "Net Memory" section with those 00,00,00,00,FF,FF
But in the Data section I do not.
The third row down is a series of numbers 80,83,91,C0...
I also have a "Option" Section which I am not familiar with.
the hasp itself has the ability to open over 100 different functions, That I can see in the Hasp Dongle Content viewer.
Prior to this I had a hasp monitor on and was able to retrieve over 50 keys which was kept in vusb.log
Are these two related

[fejkus]

Originally Posted by N3kr0s

Thanks for getting back to me, I did more investigating into the information you gave me, which leaves me a little puzzled
I have a "Net Memory" section with those 00,00,00,00,FF,FF
But in the Data section I do not.
The third row down is a series of numbers 80,83,91,C0...
I also have a "Option" Section which I am not familiar with.
the hasp itself has the ability to open over 100 different functions, That I can see in the Hasp Dongle Content viewer.
Prior to this I had a hasp monitor on and was able to retrieve over 50 keys which was kept in vusb.log
Are these two related

use vusb emulator - you can see the key whole.
don't change numbers in option or net memory.
you have to play with data section, but depends on type of hw key. the best is to get another key and make a study and then change numbers in data and you will see, what will happen.

send somewhere reg file, we take a look.

[rituraj]

Ok i am facing a similar problem. There are two similar softwares for my company on two different pc using hasp hl. The software with reg1 is the main software which loads all the modules. The software with reg2 loads limited modules though the softwares are exactly same. I tried replacing lines from reg on to reg two without success can some one throw some more light on this subject . The link to both reg file is here

http://rapidshare.de/files/47339216/reg_files.rar.html

[cghots]

replace reg line not good idea for hasp hl.