Sentinet C-Plus B Dongle Issues

[kbarsano]

I have a Sentinet C-Plus B Dongle which has been causing me plenty of grief for the past month. I have Sentinel System driver 7.5.2 installed. The dongle works with 20-20 Design 8.0 and 8.1 when connected. When I try to dump the dongle I get errors saying the dongle cannot be found. I have tried Driver 7.6.0 with the same luck. When I run safedump with the devID, 0x7C3D, I found online it returns an error RNBOsproFindFirstUnit failed with 3. The command I used was safedump 0x7C3D. When I try safedump 0x7C3D [wp] cmd returns the error DevID incorrectly formatted.

I have tried numerous dumpers and have search multiple time.

Is this dongle a SuperPro? When I matched the picture to a listing on a russian site it said it was a SuperPro. If this dongle is not a superpro please let me know so I can do some more searching on what type of dongle this is. TIA.

[kjms]

Enjoy,use this reg,
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\7C3D0000]
"Type"=dword:00000000
"DongleType"=dword:00000003
"Name"="for you"
"CellType"=hex:\
01,01,03,03,03,03,03,03,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"sntMemory"=hex:\
FA,AD,3D,7C,A8,9E,00,00,08,00,00,00,00,00,00,00,\
E9,03,AC,47,A5,46,D5,3A,D1,33,D2,3B,D7,03,E7,13,\
F0,03,DF,03,DE,03,DD,03,DC,03,DB,03,DA,0B,D9,03,\
D8,03,C6,03,D6,95,D5,03,5C,03,D3,10,D0,03,26,03,\
D0,0C,47,03,CE,10,26,92,46,13,99,07,97,65,63,65,\
2D,4A,B9,2E,0D,6E,0E,71,47,3F,21,16,E0,67,BC,33,\
46,10,73,0A,7B,22,15,1D,BC,03,BB,03,BA,03,B9,03,\
B8,03,B7,03,B6,03,B5,03,B4,03,B3,03,B2,03,B1,03

[Git]

How will it work with no value for C6 ?

Git

[yogi_saw]

I could not see any algorithm cells in it, so I think there is no need for c6 it will work without c6.but need to chk with soft as wp is 08, if any decrement happens will it work?instead of mk I would suggest vusb by gamebit.

[BfoX]

20-20 used only data from the dongle memory...

[Git]

I think MK (wrongly) ignores the WP, doesn't it?

Git

[yogi_saw]

I was helping a frnd in emulation his reg was working with vusb but not with mk...the reason was wp. it was not in either reg but while decrementing vusb was allowing without right wp but not mk

[Git]

Fair enough, he must have corrected it. WP is needed for any Simple Algo queries that may be used.

Git

[kbarsano]

So I take it I just need to take the info form the first reply and make reg file out of it. Then run the reg file then dump? Or run the reg file before each time I use the application? Or just emulate the reg file and then run the application?

[tedshred]

With regard to dumping your dongle and if it is indeed a Sentinel C-Plus B, did you try dumping with a patched sread.exe as described at the following link?

http://www.reteam.org/board/showthread.php?t=3105