New SSPro Dumper/Solver for MK (+source)

[Git]

The is no such thing as a SuperPro with 128 customer cells. What does sentinel medic say about it?

Git

[zementmischer]

The cells may not be accessible using Rainbow's official API - but almost all SSP USB dongles contain additional 64 cells which hold some values as well as an algorithm descriptor. These cells are probably used for configuration purposes.
I've never tried to write anything to these cells using the low-level API so I can't say if it's possible or not...

@tiduskg:
What version of the Sentinel Protection Installer did you have installed?
The error message indicates that either RNBOsproInitialize or RNBOsproGetVersion have failed (my posted version depends on SDK 7.1.0 - but the source code also contains SDK 6.6.0 and 7.0.0)

[tiduskg]

Sentinel medic report it is SuperPro.
I dumped this dongle with Git's tool and this is the report:

Key family is = SuperPro
Key form is = USB
Key has = 64 cells
serverName = 0
serverIPAddress = 0
serverIPXAddress = 0
version = 7.6.0
protocol = NONE
devId = 0x0731
serialNum = 0x****
capabilities = SP_CAPS_AES_ALGO
capabilities = SP_CAPS_PASSWORD_COUNTER

****!! DO NOT BRUTEFORCE WP !!****

capabilities = SP_CAPS_SECURE_TUNNEL
capabilities = SP_CAPS_DISABLE_DEVICE_SHARING
hardLimit = 1
inUse = 0
numTimeOut = 0
highestUse = 0
subLicLimit = 0
subLicInUse = 0


Processing dongle 0731
Finding cell data...
Found 0 Query cells
WorkingWriting dump file RNBO_0731.dmp

I also try Toro logger 2.01, but it can't monitor any thing except "KeyType=7 -> ULP USB"?

I still don't understand, maybe this dongle is Sentinel Dual Hardware Key?

Thank.

[Git]

> The cells may not be accessible using Rainbow's official API

Specifically why I said customer cells.

Git

[tiduskg]

Here is usb bus trace that I can't explain:

24.0 IN 1a 03 55 00 53 00 42 00 20 00 55 00 6c 00 74 00 ..U.S.B. .U.l.t. 2.2.0
72 00 61 00 50 00 72 00 6f 00 r.a.P.r.o. 2.2.16

This information show that my key is UltraPro but with all other dumper only report it only SuperPro?
I don't understand?

[jabrix]

Want to thank for this.

With spro PVA, I only get 1 cell dump & solve, but with this I can dump & solve 2 cell.

Still reg not working, the question is :
1. from picture below, it show that key info is different, emu 0400-A703, dongle 0002-8003.
2. emu 64 cells, dongle & dump 128 cells.

how to solve this?
I have 2 dongles, which this dongle already expire [06,03,DC,07]

[ REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\0000XXXX]
"Created"="Fri Oct 02 12:32:23 2009"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,00,00,00,00,00,00,\
00,00,00,00,01,00,00,01,\
00,00,01,00,00,01,00,00,\
00,00,00,00,00,00,00,00,\
00,01,00,00,00,00,00,00,\
00,00,01,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
03,03,01,01,01,00,00,00
"sntMemory"=hex:\
XX,XX,FF,FF,00,00,00,00,EF,5D,00,00,DE,59,00,00,\
31,FA,A0,F0,00,00,00,00,A8,53,00,00,A8,53,00,00,\
A8,53,00,00,AA,53,00,00,01,00,06,03,DC,07,01,00,\
06,03,DC,07,01,00,06,03,DC,07,01,00,06,03,DC,07,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,01,00,06,03,DC,07,00,00,00,00,00,00,00,00,\
00,00,00,00,01,00,06,03,DC,07,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
04,41,13,D4,80,90,2D,13,00,00,00,00,00,00,00,00

[kjms]

read mkey manual Sentinel-Spro new "Type"=dword:00000001

[jabrix]

@kjms : not working. lock not found.
this soft need install with dongle pluged.
and only work with dongle which we use when installation.

[BfoX]

the software is fire your emulator =)

[georgechou]

when i dump a key and solve then i found the error message, can anyone help me to solve this ?

"Failed to solve cell 2Eh (46)"

14:50:39 [Solver - Notification] Start solving 2 algorithm descriptors
14:50:39 [Solver - Info] 24 solver threads started
14:50:40 [Solver - Info] Standard algorithm cell 2Eh (46) - sig = 102h (258)
14:51:35 [Solver - Warning] Failed to solve cell 2Eh (46)
14:51:35 [Solver - Info] Enhanced algorithm cell 78h (120) - sig = 3DB4h (15796)
14:51:36 [Solver - Info] Solved cell 78h (120) - Descriptor = C3CC2D73h - C6 = 2A6Fh
14:51:36 [Solver - Info] 24 solver threads closed
14:51:36 [Solver - Info] Finished
https://www.dropbox.com/s/1zeb1dsaae...VER_e1fc_0.dmp