help with change x86 to x64 vusbbus

[elkan]

Hello i want to change my system from windows x86 to windows x64.

I used a software thats works without a problem with vusbbus 0.15.1.3 Chingachguk Denger2k (HL mod+) the x86 version,
Now on my new system x64 i used vusbbus 0.1.0.0 Chingachguk Denger2k & SPK the x64 version.

The problem is it don't work. every thing went well, the installation is complete the vusbdrive i get installed then the 3 hasp's are installed without a problem but the software don't work.

Is it so that i also have to change some line's in the reg file ?

I also tried to install multikey 0.18.0.3 but i think that went wrong in changing the reg file ?

Can any one advise me how to get the vusbbus x64 to work ?
i'm reading a lot on this board but i can't find the answers.

Please help.

[BfoX]

not possible. you need x64 package...

[elkan]

it not possible because ?
Yes i need x64 i update my system

[yogi_saw]

I can suggest u forget abt vusbbus for x64, transform ur reg to multikey install mk for x64(installation procedure described here)
ofcource this will work if ur orignal vusb is not custom made solution

[elkan]

All right i will give it a next try with mk 0.18.0.3 i hope this is the right version...

Her is a example from my vusbbus reg.

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\NEWHAS P\Services\Emulator\HASP\Dump\xxxxxxxx]
"Name"="X"
"Copyright"="X"
"Created"="xx.xx.xxxx"
"SN"=dword:xxxxxxxx
"Type"=dword:000000ea
"Memory"=dword:00000001
"SecTable"=hex:xx,xx,xx,xx,xx,xx,xx,xx
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,ff,f f
"Option"=hex:xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,x x,xx
"Data"=hex:ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff, ff,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff
"ColumnMask"=dword:0000001b
"CryptInitVect"=dword:0000001f
"QTable"=hex:xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,x x,xx,xx,xx,xx,xx,xx,xx,xx,xx,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
(here i delete a lot of lines)
ff
"ATable"=hex:xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,x x,xx,xx,xx,xx,xx,xx,xx,xx,xx,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,ff ,ff,ff,ff,ff,ff,ff,ff,ff,\
(here i delete a lot of lines)
ff
"QEncTable"=hex:xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,x x,xx,xx,xx,xx,xx,xx,xx,xx,xx,\
xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx
"AEncTable"=hex:xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,x x,xx,xx,xx,xx,xx,xx,xx,xx,xx,\
xx,xx,xx,xx,xx,xx,xx,xx,xx,xx,xx

Is it so that i only have to change these line.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\NEWHAS P\Services\Emulator\HASP\Dump\xxxxxxxx]

and set it to this.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multi key\Dumps\]

or do i have to change many more ?

[yogi_saw]

Just look at eample reg files and read manual for detail
pay more attention on revisions in mk specially q/a table aenctable/qenctable
goodluck

[elkan]

Thanks for the advises i have found the solution.