Solution for Vista/seven 64 bits

[gus]

Soft need :

multikey 18.0.1
Driver signature enforcemente overrider 1.3b

Steps :

download this soft and install

http://www.ngohq.com/home.php?page=F...&dwn_cat_id=34

Select "enable test mode" -> next -> ok
Select "sign a system file" -> next -> location of multikey 18.0.1 example : "c:\multikey181\64bits\multikey.sys"

Install multikey :
Double click in reg file -> ok->ok
Click Rigth botton "install.bat" -> run administrator -> wait install hardware
reboot Pc

and all ok

i test with Vista 64b and Seven 64b

[gus]

any answers?
no thanks?
anyone tried it?

ok

[foffa]

seems fine thanks aloooooooooooooooooot

i will test it , keep the good work up

[Git]

Foffa - you don't have 64bit machine, what do you mean?

Git

[hypp]

I tried this method on Windows 7 64-bit and it worked.

Anyway I had to reboot the computer after enabling test mode otherway I couldn't manage to install multikey successfully and multikey icon in device manager kept showing a "!"

After I reboot the computer the watermark "test mode" appeared on the lower right angle of my screen and I was able to install multikey.

I had a DGN of the dongle so I used another computer with sentemul2007 to load the dump and I dumped again by pva 3.3 dumper.

Finally I converted the dump to reg. I loaded the .reg file, rebooted the computer and it worked !

[smieeeci]

Originally Posted by gus

Soft need :

multikey 18.0.1
Driver signature enforcemente overrider 1.3b

does it also work with multikeyemu 0.18.0.3?

EDIT: It doesn't. System still shows that driver is unsigned (code 52).
I'll check 0.18.0.1.

EDIT2: Nothing changed. Something doesn't work properly. maybe the problem is that I'm testing it on Windows 7 RTM x64 and I used 7loader by orbit and hazar to activate it?

EDIT3: OK. I've done it.

[cadbob]

The loader was interfering wasn't it?

Does it leaves Test Mode Water mark when Multikey is running?

Or just until install and reboot Water Mark is gone?

[smieeeci]

I suppose that it was loader, i'm using ver 1.2. I've read that they fixed it next version.

I used my own certificate and I turned on test mode on my own:

BCDEDIT /set TESTSIGNING ON

It leaves watermark. Because test mode is running all the time.

To remove it I used

http://deepxw.blogspot.com/2008/12/r...-20081210.html

as dseo suggested.

[mctheRE]

I had this up and running on the rc 7.Have the latest authorized build and now no go.It seems as it's not signing the .sys file.18.03.I'm getting the unable to run due to no sign pop up

[jeman]

dear gus

i had tried on my windos 7 64 bit
the driver was signed but

the install.com not complete due to

following error

ROOT\SYSTEM\0001 :Remove fail
no devices was removed
devcon fail

Press any key to continue

anybody know to solve?