Soemthing for Christmas...

Lomex · #1 12-25-2011, 06:16 PM

Hi folks,

here something which lots of you have been asking for.

Okay here is it back again. Should still work, if you have installed only the Critial Updates from Microsoft (not sure if you installed also the non critial ones).
Did a test myself today and everything still works fine and not Test Mode needed.

Multikey V1.8.10 - 64 Bit - Fully Digitally Signed with valid Certificate untill 28.03.2012
(No Test Mode and no F8 needed)

Before you install it, you should do this. Otherwise it wont work.

Right click on the signed multikey.sys
Driver Signature TAB=> Details=> Show certificate=>Install Certificate. This will install this revoked Certificate to the trusted ones on your system.
After reboot, look at the installed multikey.sys inside the Drivers folder and check if the Driver Signature is still there, since Windows likes to remove it, if it was revoked before. Try to copy your saved one, to the drivers folder by hand again (replace the existing one), and reboot.

Multikey V1..8.10 - 32 Bit - Signed with a Test Certificate
(Signed it myself with a Test certificate. NO expiration date. But you have to be in Test Mode to get it working, but no more F8 on startup)

For Problems, read my last post on this thread.

Quote:

http://rghost.net/35602698

Pass for dl: christmas

Pass for archive: something-for-christmas

Unrar with WinRAR v3.9.1 or higher !

Lomex

skr706 · #2 12-26-2011, 01:00 AM

Hi lomex,
Cant open the file,
Seems to be wrong password for archieve
Could u please send the correct password again

SKR

Dr Pete · #3 12-26-2011, 01:31 AM

Don't change the path for unpack. Leave default. Or he fixed pass. Works.
Thank you for Christmas Present.

Lomex · #4 12-26-2011, 01:45 AM

USE your brain, before extracting. I never post wrong passwords.

Use WinRAR V3.9.1 or higher for extracting. And not shitty 7zip or something else.

Btw, it seems not much people seems to find it helpfull. But dl it seems okay for them....